Class 23 - Digital Storage Oscilloscope - Part 2

Class 23 - Digital Storage Oscilloscope - Part 2:

• One of the important parameter to select Oscilloscope: Bandwidth
• Basic DSO Circuit includes:

• Amplifier
• Track and Hold Circuit
• ADC
• Acquisition circuit
• Digital Converter

Class 22: Digital Storage Oscilloscope - DSO-Part 1

Class 22 - Digital Storage Oscilloscope - Part 1:

Key Point:

• Good Oscilloscope system is its ability to accurately reproduce the waveform
• It is used to detect and debug the issues on the hardware

Email to miycircuits@gmail.com if any questions

Class 21: Differential Signal Routing Method

Class 21: Differential Signal Routing Method

Key Points:

• Isolation with other high speed and switching nodes
• Length Matching and coupling
• Avoid the Routing of the traces over the split
• Termination and impedance

Email to miycircuits@gmail.com if any questions

ROHS - Restriction of Hazardous Substances

Class 20: ROHS - Restriction of Hazardous Substances

 

1. All the countries restriction of the Pb and other substances in the silicon and equipment.

2. Manufacturers are responsible to control design the product with in the allowable limits.

Email to miycircuits@gmail.com if any questions

Class 19: Balanced Differential Signalling

Class 19: Balanced Differential Signalling:

1. For Balanced transmission system, the signals should be routed close to each other.

2. Equal Length.

1. Different type differential signal routing is shown in the above picture.

•          Microstrip
•          Stripline
•          Stripline (Broadside coupled)

1. For the High speed interface it is recommended to route the differential referenced to GND on both side. (Ideal case - electrical validation boards).

2. Length matching tolerances as per the standard guideline

3. Avoid multiple vias on the paths to reduce the impedance mismatch.

Email to miycircuits@gmail.com if any questions